hyperMILL 5-Axis Impeller Blisk

Type: • Category: , ,

Supplier: OPEN Mind

Program impellers/blisks reliably and mill them effectively

5-axis CAM software – the Multiblade package from OPEN MIND: as simple as a standard application.

Impellers and blisks can be programmed even without special knowledge using this application. Integrated automated functions in the Multiblade package reduce the number of parameters needing to be entered to a minimum. Proven collision checking guarantees a very high level of process reliability. The use of robust tools allows machining with high infeed parameters and feedrates.

Impeller, Blisk – 5-axis CAM software | Download

Impeller Blisk. hyperMILL® 5AXIS.

Milling of impellers and
blisks made easy.
PDF | 950 kB | 2017

Impeller Blisk | Brochure

5-axis | multiblade | roughing

Multiblade roughing

In the roughing cycle, the blades are machined in a continual process starting from pre-turned stock or a semi-finished workpiece. No time-consuming simulation of the removal of material is required.

5-axis | multiblade | plunge roughing

Multiblade plunge roughing

Plunge roughing is an alternative if a horizontal feedrate cannot be effectively machined with long, slim tools. This process allows the most rigid tool to be employed to rough open a pocket between blades, and is provided as an optional module.

5-axis | multiblade | hub finishing

Multiblade hub finishing

The tool path profile can adjust the hub’s aerodynamic behaviour and appearance to suit individual customer requirements. This machining strategy can also be applied as rest machining near blades.

5-axis | multiblade | point milling

Multiblade point milling

This HSC strategy is characterised by continuous, spiral machining movements with tool point contact. This allows superb milling of even highly curved blades.

5-axis | multiblade | flank milling

Multiblade flank milling

If the blade surfaces allow for sufficiently precise swarf cutting, the Flank Milling cycle can be used. This reduces machining time. hyperMILL® 5AXIS automatically calculates the optimal tool nestling.

5-axis | multiblade | edge milling

Multiblade edge milling

This machining strategy is used whenever leading and trailing edges cannot be generated together with the flow areas in a single operation.

5-axis | multiblade | fillet milling

Multiblade fillet milling

This is the ideal strategy when the radii between the hub and the blade surfaces vary. This strategy also facilitates rest material machining – the basic requirement for choosing an optimal tool for blade and hub machining.